| Technical Data |
|
| Size of valve actuator |
0015 |
| Flange hole pattern |
F03 |
| Swivel angle |
90 |
| Shaft connection depth |
10.2 |
| Cushioning |
No cushioning |
| Mounting position |
optional |
| Mode of operation |
Single-acting |
| Design |
Scotch yoke system |
| Position detection |
Without |
| Closing direction |
Closes to the right |
| Symbol |
00991266 |
| Safety Integrity Level (SIL) |
Up to SIL 2 High Demand modeTo SIL 2 Low Demand mode |
| Supply pressure for spring strength |
4.2 |
| Operating pressure |
4.28.4 |
| Nominal operating pressure |
5.6 |
| CE mark (see declaration of conformity) |
To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) |
To UK EX instructions |
| Explosion protection |
Zone 1 (ATEX)Zone 2 (ATEX)Zone 21 (ATEX)Zone 22 (ATEX) |
| Certificate issuing authority |
German Technical Control Board North (TÜV Nord) 212170801 |
| ATEX category gas |
II 2G |
| ATEX category dust |
II 2D |
| Explosion ignition protection type for gas |
Ex h IIC T6...T3 Gb X |
| Explosion ignition protection type for dust |
Ex h IIIC T85°C...T200°C Db X |
| Explosion ambient temperature |
-20°C <= Ta <= +60°C |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC |
3 - high corrosion stress |
| LABS (PWIS) conformity |
VDMA24364-B1/B2-L |
| Ambient temperature |
-2080 |
| Torque at nominal operating pressure and 0° swivel angle |
17.6 |
| Torque at nominal operating pressure and 50° swivel angle |
9.3 |
| Torque at nominal operating pressure and 90° swivel angle |
13.8 |
| Spring return torque at 0° swivel angle |
7.5 |
| Spring return torque at 50° swivel angle |
5.6 |
| Spring return torque at 90° swivel angle |
11.3 |
| Spring strength |
3 |
| Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0°-nominal swivel angle-0° |
0.6 |
| Product weight |
1600 |
| Shaft connection |
T9 |
| Pneumatic connection |
G1/8 |
| Note on materials |
RoHS-compliant |
| Material cover |
High-alloy stainless steel |
| Material number cover |
1.4408 |
| Material seals |
FPMNBRPUR |
| Material housing |
High-alloy stainless steel |
| Material number housing |
1.4408 |
| Material screws |
High-alloy stainless steel |
| Material shaft |
High-alloy stainless steel |
| Material number shaft |
1.4301 |
