| Technical Data |
|
| Size of valve actuator |
32000 |
| Flange hole pattern |
F35 |
| Piston diameter |
385 mm435 mm485 mm535 mm585 mm635 mm685 mm735 mm |
| Swivel angle |
90 |
| End-position adjustment range at 0° |
-55 |
| End-position adjustment range at nominal swivel angle |
-55 |
| Shaft connection depth |
230 |
| Fitting connection conforms to standard |
ISO 5211 |
| Cushioning |
No cushioning |
| Mounting position |
optionalHorizontal |
| Mode of operation |
Double-actingSingle-acting |
| Design |
Scotch yoke system |
| Position detection |
Optical |
| Closing direction |
Closes to the rightCloses to the left |
| Symbol |
0099126500991266 |
| Certified for safety function to ISO 13849 and IEC 61508 (SIL) |
Product can be used in SRP/CS up to SIL 2 (Low Demand) |
| Operating pressure |
14.5123.25 |
| Nominal operating pressure |
43.5101.5 |
| CE mark (see declaration of conformity) |
To EU Explosion Protection Directive (ATEX) |
| UKCA marking (see declaration of conformity) |
To UK EX instructions |
| Explosion protection |
Zone 1 (ATEX)Zone 2 (ATEX)Zone 21 (ATEX)Zone 22 (ATEX) |
| Certificate issuing authority |
German Technical Control Board North (TÜV Nord) 212170802 |
| ATEX category gas |
II 2G |
| ATEX category dust |
II 2D |
| Explosion ignition protection type for gas |
Ex h IIB T6...T4 Gb X |
| Explosion ignition protection type for dust |
Ex h IIC T85°C...T105°C Db X |
| Explosion ambient temperature |
-20 °C <= Ta <= +80 °C |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Dew point at least 10 °C below the ambient temperature and temperature of the mediumLubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC |
0 - No corrosion stress |
| LABS (PWIS) conformity |
VDMA24364 zone III |
| Degree of protection |
IP66MIP67M |
| Ambient temperature |
-2080 |
| Note on torque |
The operating torque of the actuator must not be higher than the maximum permissible torque listed in ISO 5211, with reference to the size of the mounting flange and of the coupling. |
| Max. output torque |
32000 |
| Product weight |
4081498 |
| Shaft connection |
V120 |
| Pneumatic connection |
G1 |
| Note on materials |
RoHS-compliant |
| Material end cap |
Steel |
| Material stop screw |
Steel |
| Material bushing |
BronzePTFE |
| Material seals |
NBRTPE-U(PU) |
| Material spring |
Spring steel |
| Material spring rod |
Steel, hard-chrome-plated |
| Material housing |
Steel |
| Material piston |
Steel |
| Material piston rod |
Steel, hard-chrome-plated |
| Material tie rod |
Steel |
| Material cylinder barrel |
Nickel-plated steel |
