| Technical Data |
|
| Total stroke |
33 |
| Piston diameter |
25 mm |
| Piston rod thread |
M6 |
| Swivel angle |
90 deg +/-3 deg |
| Clamping stroke |
20 |
| Cushioning |
Elastic cushioning rings/plates at both ends |
| Mounting position |
optional |
| Design |
PistonPiston rodCylinder barrel |
| Position detection |
Via proximity switch |
| Swivel direction |
Left |
| Symbol |
00991217 |
| Variants |
Weld spatter protectionDust protection |
| Operating pressure |
210 |
| Mode of operation |
Double-acting |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC |
2 - Moderate corrosion stress |
| LABS (PWIS) conformity |
VDMA24364-B2-L |
| Ambient temperature |
-1080 |
| Effective clamping force at 0.2 MPa (2 bar, 29 psi) |
63 |
| Effective clamping force at 0.4 MPa (4 bar, 58 psi) |
127 |
| Effective clamping force at 0.6 MPa (6 bar, 87 psi) |
188 |
| Max. tightening torque Clamping finger screw |
12 |
| Theoretical clamping force at 0.6 MPa (6 bar, 87 psi) |
227 |
| Product weight |
470 |
| Type of mounting |
Either:With through-holeVia female threadWith accessories |
| Pneumatic connection |
M5 |
| Material wiper |
PPS |
| Material collar screws |
SteelGalvanised |
| Material cover |
Wrought aluminium alloyCoated |
| Material seals |
NBRTPE-U(PU) |
| Material housing |
Wrought aluminium alloySmooth anodised |
| Material piston rod |
CoatedHigh-alloy stainless steel |
| Material cylinder barrel |
Wrought aluminium alloySmooth anodised |
