| Technical Data |
|
| Size of valve actuator |
250 |
| Stroke |
40990 |
| Piston diameter |
250 mm |
| Based on standard |
ISO 15552 |
| Cushioning |
No cushioning |
| Mounting position |
optional |
| Mode of operation |
Double-acting |
| Design |
PistonPiston rodTie rodCylinder barrel |
| Position detection |
With integrated displacement encoder |
| Symbol |
00992807 |
| Functional principle of measuring system |
Potentiometer |
| Operating pressure |
43.5116 |
| Nominal operating pressure |
6 |
| Operational voltage range DC |
015 |
| Recommended wiper current |
0.1 |
| Max. wiper current, short-time |
10000 |
| CE mark (see declaration of conformity) |
To EU EMC DirectiveTo EU Explosion Protection Directive (ATEX)In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) |
To UK EX instructions |
| Explosion protection |
Zone 1 (ATEX)Zone 2 (ATEX)Zone 21 (ATEX)Zone 22 (ATEX) |
| ATEX category gas |
II 2G |
| ATEX category dust |
II 2D |
| Explosion ignition protection type for gas |
Ex h IIC T4 Gb |
| Explosion ignition protection type for dust |
Ex h IIIC T120°C Db |
| Explosion ambient temperature |
-20°C <= Ta <= +60°C |
| Operating medium |
Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium |
Lubricated operation possible (in which case lubricated operation will always be required) |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 |
Tested to severity level 2 |
| LABS (PWIS) conformity |
VDMA24364 zone III |
| Storage temperature |
-2080 |
| Relative air humidity |
5 - 100%Condensing |
| Degree of protection |
IP65IP67IP69KNEMA 4 |
| Vibration resistance to DIN/IEC 68 Part 2-6 |
Tested to severity level 2 |
| Ambient temperature |
-2080 |
| Impact energy in end positions |
1.9 |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke |
28274 |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke |
29452 |
| Air consumption on return stroke per 10 mm |
3.299 |
| Air consumption on advance stroke per 10 mm |
3.436 |
| Moving mass for 0 mm stroke |
9300 |
| Additional moving mass per 10 mm stroke |
134 |
| Basic weight for 0 mm stroke |
31100 |
| Additional weight per 10 mm stroke |
358 |
| Hysteresis |
0.33 |
| Non-dependent linearity |
±0.04% |
| Repetition accuracy in ± mm |
0.12 |
| Electrical connection |
3-pinStraight plug connector/screw terminalWith specific accessories |
| Pneumatic connection |
For tubing O.D. 8 mmWith specific accessories |
| Note on materials |
RoHS-compliant |
| Material end cap |
Coated wrought aluminium alloy |
| Material underneath cover |
Die-cast aluminium, coated |
| Material electrical connection |
Nickel-plated brass |
| Material piston rod |
High-alloy stainless steel |
| Material piston rod wiper |
NBR |
| Material tubing |
PE |
| Material screws |
Coated steelHigh-alloy stainless steel |
| Material static seals |
NBR |
| Material fitting |
Nickel-plated brass |
| Material tie rod |
High-alloy stainless steel |
| Material cylinder barrel |
Smooth-anodised wrought aluminium alloy |
