| Electrical design |
PNP |
| Output function |
normally open / closed; (configurable) |
| Communication interface |
IO-Link |
| Dimensions |
63 x 30 x 24.5 |
| Application |
configurable switch-on and switch-off delay for switching signals; for use in wet environments; indoor use |
| Operating voltage |
18...30 DC; ((in wet environments: 18...28 V) to SELV/PELV) |
| Nominal voltage DC |
24 |
| Current consumption |
< 380 |
| Max. current load total |
0.2 |
| Number of inputs and outputs |
Number of digital inputs: 2; Number of digital outputs: 2 |
| Number of digital inputs |
2; (IEC61131-2) |
| Input current limitation |
200 |
| Electrical design |
PNP |
| Number of digital outputs |
2 |
| Output function |
normally open / closed; (configurable) |
| Short-circuit proof |
yes |
| Sampling rate |
< 2000 |
| Communication interface |
IO-Link |
| Usage type |
Parameter setting |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| SIO mode |
yes |
| Required master port class |
A |
| Process data binary |
2 |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| default | 1168 |
|
| Ambient temperature |
-25...60 |
| Note on ambient temperature |
| 2000 m: -25...60 °C | | 3000 m: -25...53 °C | | 4000 m: -25...51 °C |
|
| Storage temperature |
-25...70 |
| Max. relative air humidity |
90; (linearly decreasing to 50 % (40 °C) non condensing) |
| Max. height above sea level |
4000 |
| Protection |
IP 67; IP 69K |
| Degree of soiling |
2 |
| Chemical media |
| DIN EN ISO 175, Ecolab test method 40-1 | | | the following media were tested for 28 days at constant room temperature using the dipping test method | P3-topax 66 | | P3-topax 990 | | Topactive 200 | | Topactive 500 | | Topactive OKTO |
|
| MTTF |
317 |
| UL approval |
| Ta | max. 55 °C | | File number UL | E205959 |
|
| Weight |
77.2 |
| Weight (without accessories and packaging) |
28 |
| Dimensions |
63 x 30 x 24.5 |
| Material |
housing: PA |
| Material nut |
stainless steel (1.4404 / 316L) |
| Sealing material |
FKM |
| Display |
| Power | 1 x LED, green | | Switching output | 2 x LED, yellow | | 7-segment LED display, red |
|
| Remarks |
| Further information is available in the manual. | | the device complies with overvoltage category II |
|
| Pack quantity |
1 pcs. |
|
Connector: 1 x M12, straight; coding: A; Locking: stainless steel (1.4404 / 316L); sealing: FKM |
|
Connector: 1 x M12, straight; coding: A; Locking: stainless steel (1.4404 / 316L) |
