| Number of inputs and outputs |
Number of digital outputs: 1 |
| System |
gold-plated contacts |
| Application |
for retrofitting of existing IO-Link systems; for systems without IO-Link capabilities |
| Operating voltage |
18...30 DC; (on the master side; on the controller / system: 20...30 DC) |
| Nominal voltage DC |
24 |
| Current consumption |
< 17; (both sides) |
| Protection class |
III |
| Reverse polarity protection |
yes; (on the master side) |
| Power-on delay time |
< 2; (for communication; response time switching signal: response time device added with IO-Link process cycle time) |
| Total number of inputs and outputs |
1; (on the controller / system) |
| Number of inputs and outputs |
Number of digital outputs: 1 |
| Output signal |
switching signal; IO-Link |
| Electrical design |
NPN |
| Number of digital outputs |
1 |
| Output function |
normally open / closed |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
200 |
| Type of short-circuit protection |
yes (non-latching) |
| Short-circuit proof |
yes |
| Overload protection |
yes |
| Communication interface |
IO-Link |
| Supported DeviceIDs |
| Type of operation | DeviceID |
|---|
| IO-Link Device | 1107 |
|
| Note on interfaces |
| connection to IO-Link Master |
|
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| Profiles |
| Common - I&D | Identification and Diagnosis |
|
| SIO mode |
yes |
| Required master port class |
A |
| Min. process cycle time |
4.2 |
| Note on interfaces |
| connection to IO-Link enabled auxiliary devices |
|
| Unterstützte Masterportklasse |
A / B |
| Transmission type |
COM1 (4,8 kBaud); COM2 (38,4 kBaud); COM3 (230,4 kBaud) |
| IO-Link revision |
1.0; 1.1 |
| SDCI standard |
IEC 61131-9 |
| Ambient temperature |
-25...60 |
| Storage temperature |
-25...70 |
| Protection |
IP 67 |
| EMC |
| DIN EN 61000-6-2 | | | DIN EN 61000-6-4 | in plastic or open metal tanks |
|
| Shock resistance |
| DIN EN 60068-2-27 | 15 g (6 ms) |
|
| Vibration resistance |
| DIN EN 60068-2-6 | 2 g (10...150 Hz) |
|
| MTTF |
307 |
| UL approval |
| Ta | max. 55 °C | | File number UL | E205959 |
|
| Weight |
89 |
| Material |
stainless steel (1.4404 / 316L); brass (2.0401); PBT; PA; sealing: FKM; |
| Display |
| Switching output | 1 x LED, yellow | | Power | 1 x LED, green | | IO-Link | 1 x LED, yellow |
|
| Accessory required |
| Y connection cable 1, EVC843 |
|
| Remarks |
| For information on the maximum cable length please refer to the operating instructions. | | To ensure the function according to technical datasheet and operating instructions the use of the following article is imperative: EVC843 | | the device complies with overvoltage category II |
|
| Pack quantity |
1 pcs. |
