| Product characteristics |
|
| Number of inputs and outputs |
Number of analog outputs: 1 |
| Measuring range |
-50...200 |
| Communication interface |
IO-Link |
| Process connection |
threaded connection G 1/2 external thread sealing cone |
| Installation length EL |
100 |
| Application |
|
| Measuring element |
1 x Pt 1000; (to DIN EN 60751, class A) |
| Media |
liquids and gases |
| Pressure rating |
<table><tr><td>160 bar</td><td>16 MPa</td></tr></table> |
| Vacuum resistance |
<table><tr><td>-1000 mbar</td><td>-0.1 MPa</td></tr></table> |
| MAWP (for applications according to CRN) |
160 |
| Electrical data |
|
| Operating voltage |
18...32 DC; (cULus - Class 2 source required) |
| Current consumption |
< 50 |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time |
2 |
| Inputs / outputs |
|
| Number of inputs and outputs |
Number of analog outputs: 1 |
| Outputs |
|
| Total number of outputs |
1 |
| Output signal |
analog signal; IO-Link; (configurable) |
| Number of analog outputs |
1 |
| Analog current output |
4...20 |
| Max. load |
250; ((18...19 V); 19...32 V: 300 Ω) |
| Short-circuit protection |
yes |
| Overload protection |
yes |
| Measuring/setting range |
|
| Probe length L |
100 |
| Measuring range |
-50...200 |
| Factory setting |
0...100 °C |
| Resolution |
|
| Resolution of analog output |
0.04 |
| Accuracy / deviations |
|
| Precision analog output |
± 0,3 + (± 0,1 % MS) |
| Temperature coefficient |
0,1; (In case of deviation from the reference condition 25 ± 5 °C) |
| Reaction times |
|
| Dynamic response T05 / T09 |
< 0,5 / < 2 |
| Interfaces |
|
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| Profiles |
<table><tr><td>Smart Sensor - SSP 0</td><td>Generic Profiled Sensor</td></tr><tr><td>Function</td><td>Device identification</td></tr><tr><td>Function</td><td>Process data variable</td></tr></table> |
| Min. process cycle time |
2.3 |
| Supported DeviceIDs |
<table><tr><th>Type of operation</th><th>DeviceID</th></tr><tr><td>default</td><td>848</td></tr></table> |
| Operating conditions |
|
| Ambient temperature |
-25...80 |
| Note on ambient temperature |
<table><tr><td>at medium temperature: < 160 °C</td></tr><tr><td> -25...60 °C</td></tr><tr><td>at medium temperature: < 200 °C</td></tr></table> |
| Storage temperature |
-40...100 |
| Protection |
IP 67; IP 68; IP 69K |
| Tests / approvals |
|
| EMC |
<table><tr><td>DIN EN 61000-6-2</td><td></td></tr><tr><td>DIN EN 61000-6-3</td><td></td></tr></table> |
| Shock resistance |
<table><tr><td>DIN IEC 68-2-27</td><td>50 g (11 ms)</td></tr></table> |
| Vibration resistance |
<table><tr><td>DIN IEC 68-2-6</td><td>10 g (10...2000 Hz)</td></tr></table> |
| MTTF |
334 |
| Note on approval |
<table><tr><td> Factory certificate available as download at www.factory-certificate.ifm</td></tr></table> |
| UL approval |
<table><tr><td>UL approval number</td><td>K002 </td></tr></table> |
| Mechanical data |
|
| Weight |
230 |
| Housing |
tubular |
| Dimensions |
Ø 18.7 / L = 198.8 |
| Material |
stainless steel (1.4404 / 316L); PEI; FKM |
| Materials (wetted parts) |
stainless steel (1.4404 / 316L) electropolished |
| Tightening torque |
30...50 |
| Process connection |
threaded connection G 1/2 external thread sealing cone |
| Surface characteristics Ra/Rz of the wetted parts |
Ra < 0.8 µm |
| Probe diameter |
6 |
| Installation length EL |
100 |
| Remarks |
|
| Remarks |
<table><tr><td>MS = set measuring span</td></tr><tr><td> The values for accuracy apply to flowing water.</td></tr></table> |
| Pack quantity |
1 pcs. |
| Electrical connection |
|
| Connection |
Connector: 1 x M12; coding: A |
