| Product characteristics |
|
| Number of inputs and outputs |
Number of digital outputs: 1; Number of analog outputs: 1 |
| Measuring range |
<table><tr><td>250...1600 °C</td><td>482...2912 °F</td></tr></table> |
| Communication interface |
IO-Link |
| Application |
|
| Application |
tempering temperatures; glass melting; graphite; ceramics; metals; forging; sintering; heat treatment; rolling |
| Electrical data |
|
| Operating voltage |
18...32 DC; (to SELV/PELV) |
| Current consumption |
< 50 |
| Min. insulation resistance |
100; (50 V DC) |
| Protection class |
III |
| Reverse polarity protection |
yes |
| Power-on delay time |
< 1 |
| Inputs / outputs |
|
| Number of inputs and outputs |
Number of digital outputs: 1; Number of analog outputs: 1 |
| Inputs |
|
| Test input |
type 3 (IEC 61131-2) |
| Outputs |
|
| Total number of outputs |
2 |
| Output signal |
switching signal; analog signal; IO-Link; (configurable) |
| Electrical design |
PNP |
| Number of digital outputs |
1 |
| Output function |
normally open / closed; (configurable) |
| Max. voltage drop switching output DC |
2.5 |
| Permanent current rating of switching output DC |
150 |
| Number of analog outputs |
1 |
| Analog current output |
4...20 |
| Max. load |
500 |
| Short-circuit protection |
yes |
| Type of short-circuit protection |
yes (non-latching) |
| Short-circuit proof |
yes |
| Overload protection |
yes |
| Monitoring range |
|
| Wave length range |
1...1.7 |
| Measuring/setting range |
|
| Measuring range |
<table><tr><td>250...1600 °C</td><td>482...2912 °F</td></tr></table> |
| Set point SP |
<table><tr><td>251...1600 °C</td><td>484...2912 °F</td></tr></table> |
| Reset point rP |
<table><tr><td>250...1599 °C</td><td>482...2910 °F</td></tr></table> |
| Analog start point |
<table><tr><td>250...1400 °C</td><td>482...2552 °F</td></tr></table> |
| Analog end point |
<table><tr><td>450...1600 °C</td><td>842...2912 °F</td></tr></table> |
| In steps of |
<table><tr><td>1 °C</td><td>1 °F</td></tr></table> |
| Resolution |
|
| Resolution of switching output |
1 |
| Resolution of analog output |
0.2; (+ 0.03 % of the set measuring span) |
| Resolution of display |
1 |
| Accuracy / deviations |
|
| Accuracy |
< ± 0,5 %; (of measured value, min. 4 K (degree of emission = 1, T = 23 °C)) |
| Repeatability |
1 |
| Reaction times |
|
| Response time |
2; (T > 600 °C) |
| Software / programming |
|
| Adjustment of the switch point |
Programming buttons |
| Parameter setting options |
Analog range; normally open / closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function |
| Interfaces |
|
| Communication interface |
IO-Link |
| Transmission type |
COM2 (38,4 kBaud) |
| IO-Link revision |
1.1 |
| SDCI standard |
IEC 61131-9 |
| SIO mode |
yes |
| Required master port class |
A |
| Process data analog |
16 |
| Process data binary |
1 |
| Min. process cycle time |
3.6 |
| Supported DeviceIDs |
<table><tr><th>Type of operation</th><th>DeviceID</th></tr><tr><td>default</td><td>717</td></tr></table> |
| Operating conditions |
|
| Ambient temperature |
0...65 |
| Storage temperature |
-20...80 |
| Max. relative air humidity |
95; (non condensing) |
| Protection |
IP 65 |
| Tests / approvals |
|
| EMC |
<table><tr><td>DIN EN 61000-6-2</td><td></td></tr><tr><td>DIN EN 61000-6-4</td><td></td></tr></table> |
| Shock resistance |
<table><tr><td>DIN EN 60068-2-27</td><td>30 g (11 ms)</td></tr></table> |
| Vibration resistance |
<table><tr><td>DIN EN 60068-2-6</td><td>5 g (10...2000 Hz)</td></tr></table> |
| MTTF |
74.3 |
| Mechanical data |
|
| Weight |
465 |
| Housing |
Threaded type |
| Dimensions |
M30 x 1.5 / L = 214 |
| Thread designation |
M30 x 1.5 |
| Material |
threaded sleeve: stainless steel (1.4305 / 303); polyester |
| Lens material |
<table><tr><td>tempered optical glass</td></tr></table> |
| Displays / operating elements |
|
| Display |
<table><tr><td>Display unit</td><td>2 x LED, yellow</td></tr><tr><td>Switching status</td><td>1 x LED, yellow</td></tr><tr><td>Function display</td><td>7-segment LED display, 4-digit</td></tr><tr><td>Measured values</td><td>7-segment LED display, 4-digit< |
| Operating elements |
<table><tr><td>3</td><td>Pushbuttons</td></tr></table> |
| Accessories |
|
| Items supplied |
<table><tr><td>lock nuts: 2</td></tr></table> |
| Remarks |
|
| Remarks |
<table><tr><td> Use a screened cable to protect infrared temperature sensors from interference.</td></tr><tr><td> The screen must be connected to the housing of the sensor via the connector.</td></tr></table> |
| Pack quantity |
1 pcs. |
| Electrical connection |
|
| Connection |
Connector: 1 x M12 |
